Add bar charts for non-timeseries data. For example, a bar chart of the
top 10 uploaders overall in the last month, rather than a timeseries
chart of the number of uploads per day for the last month.
Add ability to group reports by various columns. For example, you can see
the posts by the top 10 uploaders over time, or posts grouped by rating
over time.
Increase the database timeout to 10 seconds when generating reports.
Generating reports tends to be slow, especially for things like graphing
posts over time since the beginning of Danbooru.
Does not apply to anonymous users. Users must have an account to get
higher timeouts so that we can identify users scraping reports too hard.
Also add a rate limit of 1 report per 3 seconds to limit abuse.
Remove the last remaining uses of the PixivUgoiraFrameData model. As of
32bfb8407, Ugoira frame data is now stored in the MediaMetadata model,
under the `Ugoira:FrameDelays` EXIF field.
The pixiv_ugoira_frame_data table still exists, but it can be removed
after this commit is deployed.
Fixes#5264: Error when replacing with ugoira.
Allow moderators to forcibly change the username of other users. This is
so mods can change abusive or invalid usernames.
* A mod can only change the username of Builder-level users and below.
* The user can't change their own name again until one week has passed.
* A modaction is logged when a mod changes a user's name.
* A dmail is sent to the user notifying them of the change.
* The dmail does not send the user an email notification. This is so we
don't spam users if their name is changed after they're banned, or if
they haven't visited the site in a long time.
The rename button is on the user's profile page, and when you hover over
the user's name and open the "..." menu.
Log the following information in email headers:
* X-Danbooru-User: the user's name and ID.
* X-Danbooru-IP: the user's IP.
* X-Danbooru-Session: the users' session ID.
* X-Danbooru-URL: the page that triggered the email.
* X-Danbooru-Job-Id: the ID of the background job that sent the email.
* X-Danbooru-Enqueued-At: when the email was queued as a background job.
* X-Danbooru-Dmail: for Dmail notifications, the link to the Dmail.
* X-Request-Id: the request ID of the HTTP request that triggered the email.
Also make it so we log an event in the APM when we send an email.
Fix it so that emails are (hopefully) able to show the one-click
unsubscribe button in Gmail and other mail providers that support the
List-Unsubscribe header. This way users can unsubscribe instead of
marking emails as spam.
* Add the List-Unsubscribe-Post header.
* Fix the disable email notifications endpoint to support POST as well as DELETE requests.
* Fix the disable email notifications endpoint to disable XSRF protection (we don't need
users to be logged in because we use a signed URL instead).
https://www.rfc-editor.org/rfc/rfc8058#section-3.1https://www.rfc-editor.org/rfc/rfc8058#section-8.1
Fix a bug where the modqueue didn't show the correct page count when
filtering by tag. Before we showed the total number of posts in the
modqueue, instead of the actual number of posts for your search. This
was for speed reasons, but with recent fixes it should be less of a
problem to count the actual number of pages for the search.
* Optimize status:modqueue and status:unmoderated searches. This brings them down from
taking 500ms-1000ms per search to ~5ms.
* Change status:unmoderated so that it only filters out the user's disapproved posts, not
the user's own uploads or past approvals. Now it's equivalent to `status:modqueue -disapproved:evazion`,
whereas before it was equivalent to `status:modqueue -disapproved:evazion -approver:evazion -user:evazion`.
Filtering out the user's own uploads and approvals was slow and usually unnecessary,
since for most users it's rare for their own uploads or approvals to reenter the modqueue.
Before status:modqueue did this:
SELECT * FROM posts WHERE is_pending = TRUE OR is_flagged = TRUE OR (is_deleted = TRUE AND id IN (SELECT post_id FROM post_appeals WHERE status = 0))
Now we do this:
SELECT * FROM posts WHERE id IN (SELECT id FROM posts WHERE is_pending = TRUE UNION ALL SELECT id FROM posts WHERE is_flagged = TRUE UNION ALL SELECT id FROM posts WHERE id IN (SELECT post_id FROM post_appeals WHERE status = 0))
Postgres had a bad time with the "pending or flagged or has a pending appeal" clause because
it didn't know that posts can only be in one state at a time, so it overestimated how many
posts would be returned and chose a seq scan. Replacing the OR with a UNION avoids this.
Add a polymorphic `subject` field that records the subject of the mod
action. The subject is the post, user, comment, artist, etc the mod
action is for.
* The subject for the user ban and unban actions is the user, not the ban itself.
* The subject for the user feedback update and deletion actions is the user,
not the feedback itself.
* The subject for the post undeletion action is the post, not the approval itself.
* The subject for the move favorites action is the source post where the
favorites were moved from, not the destination post where the favorites
were moved to.
* The subject for the post permanent delete action is nil, because the
post itself is hard deleted.
* When a post is permanently deleted, all mod actions related to the
post are deleted as well.
* Add a global /post_events page that shows the history of all approvals,
disapprovals, flags, appeals, and replacements on a single page.
* Redesign the /posts/:id/events page to show all approval, disapproval,
flag, appeal, and replacement events for a single post (before it only
showed approvals, flags, and appeals).
* Remove the replacement history link from the post show page. Replacements
are now included in the post events page (closes#4948: Highlighed replacements).
* Add /post_approvals/:id and /post_replacements/:id routes (these are
used by the "Details" link on the post events page).
* Remove the /comment/search page. Instead put the comment search form
on the same page as the search results, so you don't have to go back
and forth to update your search.
* Add an "Edited?" search option, for finding comments that have been edited.
* Add options for sorting by oldest comments and lowest scoring comments.
The previous commit changed it so that `/pools?search[name_matches]`
does a full-text search. So for example, `search[name_matches]=smiling`
will now match pool names containing any of the words "smiling",
"smile", "smiles", or "smiled".
This commit adds a `/pools?search[name_contains]` param that does what
`name_matches` did before, and switches to it in search forms. So for
example, `search[name_contains]=smiling` will only match pool names
containing the exact substring "smiling".
This change is so that `<field>_matches` works consistently across the
site, and so that it's possible to search pool names by either an exact
substring match, or by a looser natural language match.
This is a minor breaking API change. API users can replace
`/pools?search[name_matches]` with `/pools?search[name_contains]` to get
the same behavior as before. The same applies to /favorite_groups.
Don't allow GET requests to pass the request params in the body instead
of in the URL. While Rails can handle GET params passed in the body, it
goes against spec and it may cause problems if the response is a redirect
and the client doesn't send the body params when following the redirect.
This may be a breaking change for broken API clients who were sending
GET params in the body instead of in the URL. This can happen when people
use HTTP libraries incorrectly.
Add a fix script to delete all accounts with invalid usernames. Also
change it so the owner-level user can delete accounts belonging to other
users.
Users who have logged in in the last year and who have a valid email
address will be given a one week warning. After that all accounts with
invalid names will be deleted. Anyone who has visited the site in the
last 6 months will have already seen a warning page that their name must
be changed to keep using the site.
Remove the `CurrentUser.ip_addr` global variable and replace it with
`request.remote_ip`. Before we had to track the current user's IP in a
global variable so that when we edited a post for example, we could pass
down the user's IP to the model and save it in the post_versions table.
Now that we now longer save IPs in version tables, we don't need a global
variable to get access to the current user's IP outside of controllers.
Remove the /ip_addresses page. This page allowed moderators to search
users by IP, and to see recent activity tied to an IP. However, it was
limited to IPs tied to uploads, comments, dmails, artist edits, note
edits, and wiki edits.
Remove this page because it was limited in scope and because there are
better ways of doing what it did. The /user_events page is better at
catching sockpuppets because it tracks IPs for every login, not just for
certain types of edits. And the /user_actions page is better at
monitoring user activity because it shows all activity associated with
an account, not just for certain types of edits.
Removing this allows us to drop IP addresses from all tables besides the
user_events table. This is good because these IPs are no longer necessary
for any purpose, and because storing them forever is a liability.
Add a /user_actions page. This page shows you a global timeline of
(almost) all activity on the site, including uploads, comments, votes,
edits, forum posts, and so on.
The main things it doesn't include are post edits, pool edits, and
favorites (posts and pools live in a separate database, and favorites
don't have the timestamps we need for ordering).
This page is useful for moderation purposes because it lets you see a
history of almost all of a user's activity on a single page.
Currently this page is mod-only. In the future it will be open to all
users, so you can view the history of your own site activity, or the
activity of others.
Remove the IP address search option from the /moderator/dashboard page.
This was an obsolete way of searching for sockpuppet accounts by IP.
The /user_events page should be used instead.
Track the history of the tag `category` and `is_deprecated` fields in
the `tag_versions` table.
Adds generic Versionable and VersionFor concerns that encapsulate most
of the history tracking logic. These concerns are designed to make it
easy to add history to any model.
There are a couple notable differences between tag versions and other versions:
* There is no 1 hour edit merge window. All changes to the `category`
and `is_deprecated` fields produce a new version in the tag history.
* New versions aren't created when a tag is created. Versions are only
created when a tag is edited for the first time. The tag's initial
version isn't created until *after* the tag is edited for the first time.
For example, if you change the category of a tag that was last updated
10 years ago, that will create an initial version of the tag backdated
to 10 years ago, plus a new version for your edit.
This is for a few reasons:
* So that we don't have to create new tag versions every time a new tag
is created. This would be wasteful because most tags never have their
category or deprecation status change.
* So that if you make a typo tag, your name isn't recorded in the tag's
history forever.
* So that we can create new tags in various places without having to know
who created the tag (which may be unknown if the current user isn't set).
* Because we don't know the full history of most tags, so we have to
deal with incomplete histories anyway.
This has a few important consequences:
* Most tags won't have any tag versions. They only gain tag versions if
they're edited.
* You can't track /tag_versions to see newly created tags. It only
shows changes to already existing tags.
* Tag version IDs won't be in strict chronological order. Higher IDs may
have created_at timestamps before lower IDs. For example, if you
change the category of a tag that is 10 years old, that will create an
initial version with a high ID, but with a created_at timestamp dated
to 10 years ago.
Fixes#4402: Track tag category changes
Render the HTML for autocomplete results server-side instead of in
Javascript. This is cleaner than building HTML in Javascript, but it may
hurt caching because the HTTP responses are larger.
Fixes#4698: user autocomplete contains links to /posts
Also fixes a bug where tag counts in the autocomplete menu were different
from tag counts displayed elsewhere because of differences in rounding.
Allow logged out users to call https://danbooru.donmai.us/profile.json.
This allows getting information on default settings and limits for
anonymous users.
May be a breaking API change if users were using the HTTP response code
from /profile.json to check if they were successfully logged in.
Add a Suggested tags list to the Related Tags box. The suggested tags
are just the AI tags for the post.
Suggested tags are currently hidden in CSS for beta testing. Use custom
CSS to unhide them.
