Changes:
* Make it so you can click or hover over a post's favorite count to see
the list of public favorites.
* Remove the "Show »" button next to the favorite count.
* Make the favorites list visible to all users. Before favorites were
only visible to Gold users.
* Make the /favorites page show the list of all public favorites,
instead of redirecting to the current user's favorites.
* Add /posts/:id/favorites endpoint.
* Add /users/:id/favorites endpoint.
This is for several reasons:
* To make viewing favorites work the same way as viewing upvotes.
* To make posts load faster for Gold users. Before, we loaded all the
favorites when viewing a post, even when the user didn't look at them.
This made pageloads slower for posts that had hundreds or thousands of
favorites. Now we only load the favlist if the user hovers over the favcount.
* To make the favorite list visible to all users. Before, it wasn't
visible to non-Gold users, because of the performance issue listed above.
* To make it more obvious that favorites are public by default. Before,
since regular users could only see the favcount, they may have
mistakenly believed other users couldn't see their favorites.
* only show the [+] and [-] feedback buttons to gold users
* only show the [promote] button to moderators, and only when targetting users
builder or below
* don't show either button if the target is the current user
Add upvote and downvote buttons beneath thumbnails on the post index page.
This is disabled by default. To enable it, click the "..." menu in the top
right of the page, then click "Show scores".
This is currently a per-search setting, not an account setting. If you
enable it in one tab, it won't be enabled in other tabs.
Make private favgroups a Gold-only option. This is for consistency with
private favorites and upvotes being Gold-only options.
Existing Members with private favgroups are allowed to keep them, as
long as they don't disable privacy. If they disable it, then they can't
re-enable it again without upgrading to Gold first.
Make private favorites and upvotes a Gold-only account option.
Existing Members with private favorites enabled are allowed to keep it
enabled, as long as they don't disable it. If they disable it, then they
can't re-enable it again without upgrading to Gold first.
This is a Gold-only option to prevent uploaders from creating multiple
accounts to upvote their own posts. If private upvotes were allowed for
Members, then it would be too easy to use fake accounts and private
upvotes to upvote your own posts.
* Allow Member-level users to vote.
* Don't allow Banned or Restricted users to create favorites any more.
Banned and Restricted users aren't allowed to upvote or favorite any
more to prevent sockpuppet accounts from upvoting even after they're
banned.
Make upvotes public the same way favorites are public:
* Rename the "Private favorites" account setting to "Private favorites and upvotes".
* Make upvotes public, unless the user has private upvotes enabled. Note
that private upvotes are still visible to admins. Downvotes are still
hidden to everyone except for admins.
* Make https://danbooru.donmai.us/post_votes visible to all users. This
page shows all public upvotes. Private upvotes and downvotes are only
visible on the page to admins and to the voter themselves.
* Make votes searchable with the `upvote:username` and `downvote:username`
metatags. These already existed before, but they were only usable by
admins and by people searching for their own votes.
Upvotes are public to discourage users from upvoting with multiple
accounts. Upvote abuse is obvious to everyone when upvotes are public.
The other reason is to make upvotes consistent with favorites, which are
already public.
Add `upvotes:N`, `downvotes:N`, `order:upvotes`, `order:downvotes`,
`order:upvotes_asc`, `order:downvotes_asc` metatags.
In the API, the field is called up_score / down_score. Here it's called
`upvotes` and `downvotes` because this should be easier to understand
for end users.
Note that internally, `down_score` is negative. A post that matches
`downvotes:>5` will have down_score < -5 internally.
Fix certain artist commentaries for foundation.app containing scrambled
characters. Apparently caused by the Nokogiri HTML5 parser not handling
UTF-8 input correctly when the encoding isn't explicitly set to UTF-8.
* Fix /proc not being mounted read-only.
* Fix other read-only directories not actually being mounted read-only.
This was because the mount(2) system call ignores mount flags when
creating a bind mount. The solution is to bind mount the directory
first, then remount it as read-only second.
Known bug: submounts still don't get mounted as read-only. That is, if
we're mounting /usr as read-only, and /usr has a submount of /usr/local,
then /usr/local won't get mounted as read-only.
Fix thumbnails incorrectly showing a duration of "0:00" when a video had
a duration between 59.5 seconds and 60.0 seconds. This happened because
of incorrect rounding - the seconds value was rounded up, but the
minutes value wasn't.
Examples: https://danbooru.donmai.us/posts?tags=duration:59.5...60.0+status:any
Add a Sandbox class for running untrusted external programs like ffmpeg
or exiftool inside a sandbox. This uses Linux namespaces to run the
process in an isolated container, much like a Docker container. Unlike a
Docker container, we can use it to sandbox programs when Danbooru itself
is already running inside a Docker container.
This is also more restrictive than Docker in several ways:
* It has a system call filter that is more restrictive and more
customizable than Docker's filter by default. Even if the process
breaks out of the container, the syscall filter will limit what it can
do, even if it escalates to root.
* It blocks the use of setuid binaries, so the process can't use things
like sudo to escalate to root inside the sandbox.
* It blocks all network access inside the sandbox by default.
* All files in the container are read-only by default. The sandboxed
process can only communicate by writing to stdout.
See app/logical/sandbox.rb for more details.
This isn't actually enabled yet. It will be rolled out progressively to
ensure it doesn't break things.
Block Googlebot from crawling certain slow useless URLs. Sometimes
Googlebot tries to crawl old source:<url>, approver:<name>, and
ordfav:<name> searches in bulk, which tends to slow down the site because
things like source:<url> are inherently slow, and because Google spends
hours at a time crawling them in parallel. This is despite the fact that
these links are already marked as nofollow and noindex, and source:<url>
links were removed from posts a long time ago to try to stop Google from
crawling them.
Add a Ruby wrapper library around the libseccomp library. Seccomp is
used to restrict the syscalls a program can make. See comments in
app/logical/seccomp.rb for further details.
This is not used for anything yet. It's simply adding part of the
sandboxing infrastructure for later use.
Send all logs to stderr by default instead of stdout. Fixes a problem
where parsing the output of sandboxed commands could fail, because they
could contain Rails log messages in their stdout.
When we run a command in a sandbox, we call fork+exec to run the command
in the background so we can capture its output. If Rails prints
anything to stdout between the fork and exec calls, then it will be
inadvertently captured along with the command's output. This will break
parsing of the command's output. This can happen if warning messages are
printed by Rails while setting up the sandbox between the fork and exec
calls.
Writing to stderr is also more correct, since stdout is buffered by
default, which means logs could potentially be lost if the process dies
unexpectedly before the buffers are flushed. Stderr is unbuffered by
default, which means logs will always be output immediately.
Only load the `listen` and `solargraph` gems in the development
environment, not the test environment. The `listen` gem automatically
spawns background threads to listen for file changes, in order to
automatically reload code when files change, which we don't want or need
in test mode. These threads can interfere with sandboxing, because they
prevent us from being able to call unshare(2) (which can only be called
from a single-threaded process).
Bug: If a media asset got stuck in the 'processing' state during upload,
then it would stay stuck forever and the file couldn't be uploaded again
later.
Fix: Mark stuck assets as failed before raising the "Upload failed"
error. Once the asset is marked as failed, it can be uploaded again
later. Also, only wait for assets to finish processing if they were
uploaded less than 5 minutes ago. If a processing asset is more than 5
minutes old, consider it stuck and mark it as failed immediately.
Assets getting stuck in the processing state is a 'this should never
happen' error. Normally if any kind of exception is raised while
uploading the asset, the asset will be set to the 'failed' state. The
only way an asset can get stuck is if it fails and the exception handler
doesn't run, or the exception handler itself fails. This might happen if
the process is unexpectedly killed, or possibly if the HTTP request
times out and a TimeoutError is raised at an inopportune time. See below
for discussion of issues with Timeout.
[1]: https://vaneyckt.io/posts/the_disaster_that_is_rubys_timeout_method/
[2]: https://jvns.ca/blog/2015/11/27/why-rubys-timeout-is-dangerous-and-thread-dot-raise-is-terrifying/
[3]: https://adamhooper.medium.com/in-ruby-dont-use-timeout-77d9d4e5a001
[4]: https://ruby-doc.org/core-3.0.2/Thread.html#method-c-handle_interrupt-label-Guarding+from+Timeout-3A-3AError
Change the rules for automatically retiring aliases and implications:
* Retire aliases to tags that are empty, or that are for a general or
artist tag that hasn't received any new posts in the last two years.
* Retire implications from tags that are empty.
* Don't retire aliases or implications for character, copyright, or
meta tags any more, unless the tags are empty.
Fix `https://danbooru.donmai.us/artists.json?expires_in=300` failing with
an `'300' is not a valid duration` error. This call pattern is used by the
Translate Pixiv Tags userscript.
Caused by a5ed8c72, which changed the `age:N` metatag to require time
units, but this inadvertently changed the `expires_in` parameter to
require them too.
Using `expires_in` without time units is deprecated and will be removed
in the future.
Make it possible to reapprove failed BURs that removed aliases or
implications.
Before if a BUR failed midway through, and we tried to reapprove it,
then it would fail when it got to a `remove alias` line because the
alias had already been removed. Now we keep going if we try to remove an
alias or implication that has already been removed.
Change the /bulk_update_requests page to show the newest BURs first
instead of pending BURs first. This is more consistent with index pages
on the rest of the site, which normally default to newest first. Fixes
an issue where failed BURs would be shown first forever unless they were
manually approved or rejected.
Fix the video duration not being shown on thumbnails on the
https://danbooru.donmai.us/comments page.
BUG: this introduces duplicate HTML ids on the comments page. Post
thumbnails and post comment containers both have the same html ID.
* Change `age:` metatag to require time units. This means e.g.
`age:<600` no longer works; instead you have to say `age:<600sec`.
* Allow time units in the `age:` metatag to be abbreviated as long as
they're unambiguous. This means `age:<60sec`, `age:<5min`, and
`age:<5mon` now work, in addition to `age:<60s` and `age:<60seconds`.
* Allow the `ratio:` metatag to be written like `ratio:16/9` in addition
to `ratio:16:9`.
* Fix invalid date searches like `date:foo` or `date:05-15-2021`
to return nothing instead of raising an "undefined method
'beginning_of_day' for nil" exception. (`date:05-15-2021` is invalid
because it's parsed as DD-MM-YYYY).
* Fix invalid searches like `score:foo`, `ratio:foo`, and `mpixels:foo`
to return nothing instead of being treated like `score:0`, `ratio:0`,
`mpixels:0`.
* Fix `age:<60m` to return nothing instead of silently being treated
like `age:<60seconds`.
* Fix `age:foo` to return nothing instead of silently being treated like
`age:0d` (return all uploads from today).
Fixes#4389.
The favorites table is too big and dumping it tends to time out. Then
the job keeps retrying even though it always fails, then multiple
instances of the job build up in the job queue because the old jobs
never finish.
Fix the `enable_seo_post_urls` config option not being respected. This
option controls whether filenames in image URLs contain the tags. This
option requires URLs rewrites in Nginx to work so it's disabled by
default.
